Investigation of the Feasibility of Increasing the Tail-grouting Zone during Mechanized Tunneling in Sandy Soils
Abstract
Nowadays, excavation in urban environments can have many risks; one of these hazards is improper tail-grouting of Earth Pressure Balance Machine (EPBM) and the consequent ground surface settlement. Failure to fill the tail space with suitable grout significantly affects the surface displacements. Injecting more grout to penetrate deeper around the tunnel will play a more effective role in reducing displacements and permeability of the soil. Therefore, experimentally investigation of the feasibility of increasing the tail-grouting zone during excavation around the tunnel space and the effect of this penetration on the amount of ground surface displacements is the main purpose of this paper. Thus, experimental tests were performed with different grout injection pressure and the effect of each of the pressure on the penetration depth of grout into the soil new laboratory model were examined. Then to study the effect of the grout penetration depth on surface settlement to determination of the adequate amount of grout injection pressure a numerical modeling of Tabriz metro line 2 by FLAC3D software were completed. For this purpose, the results of the laboratory tests (the penetration depth of grout) were used in numerical modeling. The results indicated that the amount of penetration in the implemented granulation has increased due to the increase in pressure, so doubling the pressure causes a 30% increase in grout penetration in the surrounding soil. The results of numerical studies showed that increasing the range of injection in the modeling causes a significant reduction (80 percent) in the ground surface settlement.
Keywords:
tail-grouting, numerical modeling, laboratory modeling, injection pressure, ground surface settlementPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

