A Comprehensive Investigation of Performance Characteristics, Mechanical Properties and Durability Parameters of Self-compacting Concrete Containing Iron Slag as Coarse Aggregate
Abstract
In this paper, iron slag is used as partial coarse aggregate substitution in Self-compacting concrete (SCC). The SCC samples tests were conducted after 28 days of water curing for samples with 0%, 10%, 20%, 30%, 40%, 50%, and 60% iron slag as coarse aggregate substitutes. This paper evaluates slump flow, V-funnel, L-box, compressive strength, flexural strength, splitting tensile strength, surface water absorption, capillary water absorption, electrical resistance, acid resistance, and ultrasonic pulse velocity (UPV) of concrete samples. Furthermore, scanning electron microscopy (SEM) of samples was investigated for evaluating cement paste microstructure. Samples containing 20%, 60%, and 60% iron slag as coarse aggregate substitute have higher compressive, flexural, and splitting tensile strength than control samples (about 18.4%, 28.6%, and 16.9% higher, respectively). In addition, using 10%, 20%, 30%, and 40% iron slag as coarse aggregate increased the compressive strength. Moreover, incorporating iron slag as a coarse aggregate decreased the mass loss of samples which were exposed to the acid environment compared to control specimens. Using iron slag as partial coarse aggregate substitution reduced the porosity of the cement matrix compared to control samples (based on SEM images).
Keywords:
self-compacting concrete, iron slag aggregate, coarse aggregate, mechanical strength, durabilityPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

