Optimization of Breakpoint Chlorination Technologies for Drinking Water Treatment: a Hungarian Case Study
Abstract
Ammonium ion is one of the major pollutants found in drinking water sources in Hungary, especially in deep aquifers. under oxidative conditions, ammonium can transform into nitrite ions in the water system, posing potential health risks. In Hungary mostly biological process or breakpoint chlorination are used to eliminate ammonium ion from raw water during the drinking water treatment process. When breakpoint chlorination is applied, harmful by-products are formed. Trihalomethanes concentrations have long been regulated in Hungary, therefore during the design and optimization of the breakpoint technologies trihalomethane concentrations have been considered. However, haloacetic acids (HAA5) and chlorate ion have been recently regulated in accordance with EU Directive 2020/2184. Chlorate is a by-product that appears in treated water when sodium hypochlorite is used in breakpoint chlorination.
Experiments were carried out at four Hungarian case study areas to determine the optimal strategy for breakpoint chlorination: applying higher chlorine dosages with lower contact times, or lower chlorine dosages with higher contact times. The investigations concluded that the preferable dosing strategy is to use lower chlorine concentrations and longer contact times. This approach reduces chemical demand (cost-effective) and has a neutral effect on THMs formation. it can be concluded that when the raw water contains ammonium ion concentrations above 0.5 mg/l, the use of sodium hypochlorite may raise concerns due to elevated chlorate ion levels in the treated water, particularly during summer. Further research is required to expand the optimization strategy, considering not only ammonium and trihalomethane concentrations but also chlorate concentrations.
Keywords:
ammonium ion, breakpoint chlorination, by-products, chlorate ion, technology optimizationPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

