Sustainable Concrete: Exploring Fresh, Mechanical, Durability, and Microstructural Properties with Recycled Fine Aggregates
Abstract
The growing construction industry and global population have led to increased demand for concrete, resulting in increased waste production. Recycling construction and demolition (C&D) waste as recycled fine aggregates (RFA) in concrete could help reduce waste and conserve natural resources. This research delves into the meticulous examination of particle packing density within specific cylindrical volumes under standard compacting efforts, elucidating an order of compressive strength. The study comprehensively explores various concrete properties, including workability, compressive strength, flexural strength, split tensile strength, drying shrinkage, electrical resistivity, rapid chloride penetration, and microstructural characteristics (analyzed through XRD, SEM, and EDAX). RFA particles, ranging from 0.15 to 4.75 mm, were employed as partial replacements for fine aggregates, with replacement percentages varying from 0% to 100% in increments of 25%. The empirical findings underscore that the incorporation of RFA significantly enhances concrete properties. However, it was observed that surpassing the optimum replacement percentage of 25% (RFA 25) adversely impacts the concrete’s strength and microstructure. Specifically, RFA 25 exhibited remarkable improvements, with a 14.75% increase in compressive strength, a 6.61% boost in flexural strength, and a 13.14% enhancement in split tensile strength compared to conventional concrete (RC). Furthermore, RFA 25 demonstrated a 4.16% increment in drying shrinkage, 17.65% higher electrical resistivity, and an 18.83% superior resistance to chloride penetration compared to RC. The analysis of XRD, SEM, and EDAX results elucidated that at lower replacement percentages, the pozzolanic reaction enhances strength by forming additional hydration products. Conversely, at higher replacement levels, strength diminishes.
Keywords:
construction and demolished waste, durability properties, recycled fine aggregates, mechanical properties, microstructural propertiesPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

