Experimental Study on Direct Shear Strength of Fiber Reinforced Self Compacting Concrete under Acid and Sulfate Attack
Abstract
This study primary is to investigate the shear strength of self-compacting concrete (SCC) reinforced by steel-fiber (SF) and polypropylene-fiber (PPF) in different environmental conditions: the air, sulfate (MgSO4 with a concentration of 5%) and acid (H2SO4 with a concentration of 5%). The study also examines the effect of fiber volume fraction on the workability, shear strength, compressive strength, and splitting tensile strength of fiber reinforced SCC. The article aims to determine the durability effects of both fibers and their resistance to aggressive environmental conditions. The contribution of this article is an experimental investigation on the shear strength of SCC reinforced by SF as well as PPF in 3 different environmental conditions after 30 days of exposure. The study also investigated the fresh and mechanical properties of 5 different mixtures of SCC with/out 0.1% and 0.2% fibers. The study also concluded that PPF decreased the workability of SCC badly, and special care must be taken when selecting its volume fraction. Also, it was found that generally shear strength of SCC mixes enhanced with increasing SF and PPF volume fraction. Moreover, it was found that both fibers have good durability effects, and resist aggressive environmental conditions, with the best results obtained from samples containing 0.2% SF. In the air condition, while the compressive strength, shear strength and tensile strength results were 52.6MPa, 6.43MPa and 3.91MPa, in the sulfate condition those were 46.37MPa, 6.55MPa and 3.59MPa, and in the acid condition those were 34.4MPa, 5.5MPa and 3.46MPa, respectively.
Keywords:
fiber reinforced self-compacting concrete, polypropylene fiber, steel fiber, direct shear strength, workabilityPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

