Optimization of Tunnel Boring Machine (TBM) Disc Cutter Spacing in Jointed Hard Rock Using a Distinct Element Numerical Simulation
Abstract
The Tunnel Boring Machine (TBM) tunneling process in hard rock is actually breakage of a rock mass that is not necessarily intact. Thus, undoubtedly, joints and discontinuities play a role in TBM performance. In addition, this performance depends on the rock breakage efficiency induced by the TBM cutterhead. Both the rock mass and the TBM specifications affect the rock breakage and chipping process and thus in the machine efficiency. In this paper, the chipping process in a type of jointed hard rock under indentation by two TBM disc cutters has been numerically simulated using the Discrete Element Method (DEM) in two dimensions. The spacing of the cutters has been optimized regarding optimization of some defined criteria such as chip thickness, chipping area and also significantly the penetration rate. The optimum cutter spacings on the selected hard and jointed rock were identified to be in the range about 110 to 140 mm for different joints frequencies. According to the simulation results, it is believed that the numerical simulation will contribute to an improved knowledge of rock fragmentation, which will in turn help to enhance mining, drilling and tunneling efficiency through the improved design of mining tools and equipment.
Keywords:
Tunnel Boring Machine, disc cutter, optimization, jointed hard rock, numerical simulationPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

