Investigation of the Effect of Different Saturation Methods on the Undrained Shear Strength of a Clayey Soil Compacted with Standard and Modified Proctor Energies
Abstract
In this study, unconsolidated-undrained (UU) shear strengths of a clayey soil that is subject to saturation separately by using vacuum saturation method and falling head method were investigated. In the study, a soil with CL class according to Unified Soil Classification System was used. The soil samples prepared by being compacted in a rigid-wall permeameter mechanism were subject to a saturation process for periods varying from 1 week to 4 weeks. In the saturation by using falling head method, maximum 4m hydraulic load was applied to the samples. In saturation by using vacuum method, minimum - 70 kPa vacuum was used. After the saturation process, the samples were subject to UU type triaxial tests. Depending on the saturation method and duration, a decrease of approximately 2 - 3 times was observed in UU shear strength parameters (cu and ϕu) of the samples, which are subject to the saturation process, compared to the unsaturated samples. In the samples compacted with Standard Proctor Energy (SPE), strength parameters obtained under vacuum for one week were lower compared to samples saturated for 4 weeks by using the method of saturation by gravity. In the samples compacted with Modified Proctor Energy (MPE), vacuum method did not give a successful result.
Keywords:
saturation, vacuum, falling head, rigid wall permeameter, undrained shear strength, clay, soil, compaction energy, ProctorPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

