New Formulations for Dynamic Behavior of Sand-Waste Tire Mixtures in a Small Range of Strain Amplitudes
Abstract
This paper describes the results of a series of cyclic triaxial tests on sand - waste tire mixtures, and applications of genetic programming (GP) and stepwise regression (SR) for the prediction of damping ratio and shear modulus of the mixtures tested. In the tests, shear modulus, and damping ratio of the geomaterials were measured for a strain range of 0.0001% up to 0.04%. The input variables in the developed GP and SR models are the waste tire content (0%, 10%, 20%, and 30%), waste tire type (tire crumbs or tire buffings), strain, and confining pressures (40 kPa, 100 kPa, and 200 kPa), and outputs are shear modulus and damping ratio. Test results show that the shear modulus and the damping ratio of the mixtures are strongly influenced by the waste tire inclusions. The performance of the proposed GP models (R2 = 0.95 for shear modulus, and R2 = 0.94 for damping ratio) are observed to be more accurate than that of the SR models (R2 = 0.87 for shear modulus, and R2 = 0.91 for damping ratio).
Keywords:
sand, waste tire, cyclic triaxial testing, stepwise regression, genetic programmingPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

