Application of Interferometry Method for Dynamic Continuous Testing of Bridges
Abstract
The paper presents the selected results of experimental tests under dynamic loads that were conducted on various bridges structures (road-tram bridge, railway culvert and single-arch footbridge). The dynamic loads were caused by the passages of various trains, trams, trucks and pedestrians. The displacements of the bridge structures were monitored using the interferometric radar, which is a precision microwave instrument suitable to the automatic non-contact registering of vibrations and displacements of various engineering structures. Based on the measured displacements, the vibration frequencies of the bridge structures were determined using the FDD (Frequency Domain Decomposition) method. The received results show that the footbridge has the highest dynamic sensitivity of all studied bridge structures. Two first natural frequencies of the structures were distinguished what approximately corresponded to the dominant frequencies received from the forced vibration tests. The maximum displacements equalled 0.65 × 10–3 m; 5.75 × 10–3 m and 2.23 × 10–3 m for railway culvert, road-tram bridge and footbridge, respectively. Based on the frequencies of bridges, the logarithmic damping decrements (LDDs) and damping ratios (ζ) were estimated. The highest LDD = 0.55 and ζ = 8.72% were obtained for the culvert. Generally, vibration frequencies and displacements of the bridges are safe from the functional and design point of view. The interferometric radar can be used instead typical sensors and measurement methods to monitor various engineering structures. Conclusions drawn from the field tests can be helpful in the measurements using the microwave interferometry method.
Keywords:
Interferometric radar, bridges, dynamics, field testing & monitoring, displacementPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

