Numerical Simulation of Shear Behaviour of Non- Persistent Joints under Low and High Normal Loads
Abstract
In this paper, the effect of rock bridge surface on the shear behavior of planar non-persistent joints under low and high normal loads has been investigated using particle flow code in 2 Dimensions. PFC2d was calibrated with respect to the data obtained from experimental laboratory tests to ensure the conformity of the simulated numerical models response. The models consisting non-persistent joint were simulated and tested by shear loading under low and high normal loads. The discrete element simulations demonstrated that the failure pattern was mostly influenced by normal load, while the shear strength was linked to the failure pattern and failure mechanism. The failure patterns were found reasonably similar to the experimentally observed trends.
Keywords:
Particle flow code, joint separation, normal load, shear and tensile cracksPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

