Numerical Model of a Reinforced Concrete Building: Earthquake Analysis and Experimental Validation
Abstract
Shaking-table experiments of relatively large-scale specimens play a fundamental role in deepening our understanding of seismic response of existing structures and verification of numerical models. However, and in apparent contradiction, the preparation of such a dynamic laboratory experiment requires a-priori advanced numerical simulations, necessary to both fine-tune the test specimen properties and calibrate the input motion, as a function of the objectives of the test and capabilities and characteristics of the shaking table. This research thus concerns the development of a fibre-based finite elements model of a halfscale 3D reinforced concrete frame tested under dynamic conditions at the European Centre for Training and Research in Earthquake Engineering (EUCENTRE, Pavia, Italy). Since this reduced-scale specimen is very much based on a full-scale counterpart previously tested under pseudo-dynamic conditions at the European Laboratory for Structural Assessment (ELSA) of the Joint Research Centre (JRC, Ispra, Italy), the first part of the work consisted in verifying that the software tool employed in the numerical simulations was capable of duplicating the pseudo-dynamic real test results. Having successfully met the latter objective, the second part of the work consisted in the attempted numerical simulation of the shaking table tests, with a view to ascertain that the response of the model will be within the envisaged response targets and that the necessary input motion is compatible with the shaking-table characteristics.
Keywords:
Numerical simulation, fibre-based analysis, nonlinear analysis, time history analysis, pushover, rc structurePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

