Reuse of Refractory Brick Wastes (RBW) as a Supplementary Cementitious Material in a Concrete
Abstract
The main purpose of this study is to evaluate the reuse of refractory brick wastes (RWB) as a supplementary cementitious materials (by a total replacement of silica fume) to produce a new concretes; namely a high performance fiber-reinforced concrete (HPFRC). This work presents an experimental study on the formulation and physico-mechanical characterization of high performance fiber reinforced concretes based on three types of refractory brick wastes. These were recovered from the float glass industry (Mediterranean Float Glass) after their use in the oven basin (i.e. d. they are considered waste unit). Three compositions of concrete (HPFRC) were established based on three types of refractory brick wastes (finely crushed), with the dosage of each type of bricks is kept constant and similar that dosage of silica fume used for the control concrete. While all the other components and the water/binder ratio are maintained constant with the same quantity of the superplasticizer. The performance of HPFRC, were evaluated by determining the essential characteristics of fresh and hardened concrete. The results obtained showed that refractory bricks finely ground have the potential to be used as cementitious material or additions for concrete manufacture.
Keywords:
refractory brick wastes, concrete, fluidity, compressive strength, tensile strengthPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

