Effect of Fly Ash on Properties of Self-Compacting High Strength Lightweight Concrete
Abstract
As known, fillers directly affect the properties of self-compacting concrete. Fly ash is one of the common fillers used in production of SCC. Using lightweight concrete is extremely important for reducing the self-weight of structures, especially in heavy ones, like high rise buildings. It enables to decrease additional loads in case of renovation or/strengthening of existing structures. Moreover, self-compaction avoids using vibrations for compaction of concrete in existing structures. Therefore the present study is aimed at investigating the effect of change in fly ash content on the properties of self-compacting lightweight concrete (SCLWC). For this reason slump flow test, J-Ring test, L-Box test and V-funnel test were conducted to find workability of the fresh concrete mixture. Further compressive strength, splitting tensile strength, modulus of elasticity and flexural strength of the hardened concrete were obtained. Three concrete mixes of SCLWC with different fly ash contents were prepared to find the best workability and hardened concrete properties. The results of this study form a basis for proportioning of effective concrete mixtures suitable for repairing existing structures and elements.
Keywords:
self-compacting concrete, lightweight concrete, superplasticizer, coarse aggregate, fine aggregatePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

