Comparison of Experimental and Analytical Results on Masonry Infilled RC Frames for Cyclic Lateral Load
Abstract
The aim of the paper is to give a suggestion to the structural engineers to model masonry infilled reinforced concrete frames. We made several experiments, and developed some numerical models. Our previous papers [12–15] we showed three different FEM numerical models (equivalent diagonal strut model, orthotropic surface model and "suggested sophisticated model"), and we made a comparison study between the numerical results and the experimental tests in case of monotonic increasing lateral loads. The experiments were continued with cyclic lateral loads. Using the earlier proposed bi-linear σ - ε curve of the masonry infill and the dierent Young’s moduli to model unloading, which are based on EC6, shows good correlation with the test results, but unfortunately these are not enough precise to calculate the size of the areas under the load-displacement curves, so we obtained wrong damage parameters. We suggest a new trilinear σ - ε curve. Using this proposed trilinear σ - ε curve of the masonry infill, which is based on EC6, using the "Suggested sophisticated model" with the equivalent struts of the mortar layer shows good correlation with the experimental test results. Both of the calculated dissipated energies can be calculated in good approximation also before and after the yield point of the infill masonry, thus are already usable to calculate the damage parameter D, which were determined by energy concept. With the help of the damage parameter D, a comprehensive damage-equivalent curve f (D) is suggested to calculate the cyclic degradation of the two-storey, one-bay, masonry infilled RC frames.
Keywords:
masonry infilled RC frames, cyclic lateral load, numerical modelling of infill masonry wall, material characteristics of the masonry infillPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

