Experimental Investigation on Crushing of Granular Material in One-Dimensional Test
Abstract
A series of one-dimensional compression tests have been carried out on three kinds of granular materials in a dense state to investigate their mechanical and crushing behaviours. A new testing apparatus that can simultaneously measure the axial and lateral stresses acted on the cylindrical specimen was also developed.
Experimental results show that the break-point stress on e – log p curve is the largest for glass beads ballotini. A rise in compression index with the increasing axial load is observed for all three granular materials. The lateral earth pressure coefficient at rest Ko for the three granular materials slightly increases with the increasing axial load and attains a steady value between 0.25 and 0.3 at the initial loading stage. The value for Ko markedly increases as the axial load is removed during the unloading process. The axial strain of Masado is the largest at the same axial load level due to its mineral hardness. Experimental results demonstrate that the crushing degree of granular material is greatly influenced by the loading modes and conditions.
Keywords:
One-dimensional compression, particle crushing, grain size distribution, lateral earth coefficient, compressibilityPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

