The Effects of Tragacanth Addition on the Thermal and Mechanical Properties of Lightweight Concretes Mixed with Expanded Clay
Abstract
The effects of adding tragacanth, which is a natural resin, as expanded clay aggregate and binder to specimens on the thermal and mechanical properties of lightweight concretes has been examined in this study. Expanded clay with diameters of 4 - 8mm and by proportion 5%, 10% and 20% of cement’s weight was added to specimens in the study. As a binder, by addition of 1% tragacanth to cement at the rate of 1%, new lightweight concrete specimens with densities varying between 867 kg/m3to 1452 kg/m3were produced. Tragacanth with the same proportions of mixture was prepared in pure specimens in order to compare. Water / cement ratio was kept constant in all mixtures. At the end of a drying time of 28 days, thermal conductivity, specific heat capacity, compressive strength, modulus of elasticity, water absorption and drying quantities of specimens were confirmed. As a result, decrease of thermal conductivity, density and compressive strength of specimens was seen through adding tragacanth and raising the amount of expanded clay.
Keywords:
Expanded clay, tragacanth, thermal conductivity, lightweight concretePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

