Rapid Stabilization of Sands with Deep Mixing Method Using Polyester
Abstract
Rapid stabilization of weak soils is one of the important and current topics in geotechnical researches such as military application and stabilization of landslides. Deep mixing is an improvement method applied in the form of creating mixed columns which involves in-situ mixing of soil and lime or Portland cement with special equipment. The aim of this study was to evaluate the feasibility of utilizing polymers as a binder for rapid stabilization of sandy soils with deep mixing method. For this purpose, a series of unconfined compression tests were conducted on three dierent sandy soils improved with polyester. In the experiments, polyester was used at three dierent ratios of 10%, 20% and 30% and samples cured for 3 hour, 1, 3, 7 and 28 days. The laboratory test results of 3 hours samples showed that soils mixed with adequate polyester could reach a similar strength range of 28 days cured soils improved with cement or lime which was reported in the literature. The unconfined compressive strength increased with the increasing polyester ratio, effective diameter, and relative density and curing period, whereas, the changes on unconfined compressive strength were insignificant with the increase of freeze-thaw cycles. The overall evaluation of results has revealed that polyester is a good promise and a potential candidate for rapid deep mixing applications.
Keywords:
Rapid stabilization, deep mixing, polyester, sand, unconfined compressive strength, freeze-thawPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

