Mechanical Properties of Concrete with Copper Slag and Fly Ash by DT and NDT
Abstract
This paper presents a laboratory study about the influence of combination of Fly Ash (FA) and Copper Slag (CS) on the mechanical properties of concrete. Concrete mixtures are made with 10%, 20% and 30% replacement of cement with low lime (class F) fly ash by mass and fine aggregate is replaced by CS from 0 - 100% with an increment of 20% by volume. On the hardened concrete, Destructive Test (DT) methods such as compressive strength (7, 28, 56 and 90 days), split tensile strength (28 days) and flexural strength (28 days) are determined. Moreover, Non-Destructive Test (NDT) methods such as Ultrasonic Pulse Velocity (UPV) and Digital Schmidt Rebound Hammer (RH) tests are also determined. Based on the experimental results, both NDT and DT techniques, the results are favorable for concrete with industrial wastes such as Fly Ash and Copper Slag and also superior to control concrete.
Keywords:
FlyAsh, Copper slag, Mechanical properties, Destructive, Non-destructive testPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

