Suitability of Flyash-Lime-Phosphogypsum Composite in Road Pavements
Abstract
The paper presents the suitability of flyash-limephosphogypsum composite for its use in road pavements. The content of lime and phosphogypsum was varied from 2 to 10% and 0.5 to 4% respectively in flyash. The specimen prepared was cured for 7, 28, 56 and 90 days with burlap method of curing. Compaction tests were conducted on different flyash-lime-phosphogypsum composite and these results were used for casting cylindrical specimens for unconfined compressive strength, split tensile strength, slake durability and for determination of bearing ratio. It has been concluded that flyash-lime-phosphogypsum composite satisfy the unconfined compressive strength, split tensile strength, slake durability criteria as well as giving higher bearing ratio values at 28 days of curing. Good agreement is observed between the experimental values and predicted values for tensile strength, bearing ratio, slake durability indices. The developed models will be useful for making preliminary estimate of these parameters by the field engineers for planning purposes. The empirical models presented are based on the experimental data within the range of parameter (curing period 7 to 90 days) and materials tested. Beyond this range of values the model may be checked with experimental results. The models reported in literature under estimate the properties like bearing ratio, tensile strength and slake durability indices determined from the unconfined compressive strength. The flyash-lime-phosphogypsum composite (flyash + 8% lime + 2% phosphogypsum) cured for 28 days can be used as a base/subbase course material in road pavements.
Keywords:
Flyash, Lime, Phosphogypsum, Compaction, Unconfined compressive strength, Tensile strength, CBR, Slake durability, SEM, XRD, CorrelationPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

