De-Icing Salt Scaling Damage Kinetics of Fibre Reinforced Concretes Made with High Bond Crimped Steel Fibres
Abstract
Durability of steel fibre reinforced concrete (SFRC) specimens is tested and evaluated. Concrete is mixed with moderately sulphate resistant CEM I 42.5 cement and does not contain airentraining agent. The aim of the research is to study how the dosage of high bond crimped steel fibre influences the durability damage kinetics of SFRC; freeze-thaw resistance, de-icing salt scaling resistance and resistance to water penetration are studied, completed with basic mechanical performance tests (compressive strength, modulus of elasticity, flexural tensile strength, splitting tensile strength, flexural toughness, fracture toughness, apparent porosity and vacuum water absorption). Results reveal the importance of the increased volume of the interface transition zone (ITZ) around the steel fibres in the first freeze-thaw cycles and the importance of the internal restrain activated by the steel fibres during later freeze-thaw cycles.
Keywords:
Steel fibre reinforced concrete, crimped fibre, durability, salt scaling, freeze-thawPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

