Numerical Study on Shear Stress Variation of RC Wall with L Shaped Section
Abstract
In recent years, and after the 2003 Boumerdes earthquake, a new type of building is being constructed in Algeria. The new concept is based on the concentration of reinforced concrete shear walls with L shape at the building corners. The seismic behavior of such configuration is not well known nowadays. Numerical investigation was carried out on reinforced concrete structure to evaluate the stress distribution at the base of the corner L shaped walls. Influence of number of stories, length of the shear wall as well as the thickness of the wall was considered in our investigation. In total, more than 200 numerical models were crated and analyzed. The analyses showed that, reinforced concrete wall with 15 cm, or less, in thickness should have a minimum length of 10 times the thickness; however, for RC walls with a thickness of more than 20 cm, the length of the wall should be greater than 7 times the thickness. In this paper the main results of this investigation are presented.
Keywords:
Reinforced concrete, L-shaped shear wall, high-rise RC building, shear behavior, stress distributionPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

