Effects of loading conditions and specimen thickness on the flexural behavior of fiber-reinforced cementitious composites
Abstract
The flexural performance of polypropylene (PP) and polyvinyl alcohol (PVA) fiber reinforced cementitious composites (FRCC) have been investigated within the scope of this study. Thin plates and relatively thicker prismatic specimens have been prepared by using three fiber-matrix combinations. The center-point and two-point loading flexural performance of these specimens has been determined in terms of; first cracking strength, flexural strength and toughness. Test results showed that there is a significant difference in the flexural properties and toughness between thin specimens (mini-plates; thickness/span = 0.08) incorporating PP and PVA fibers. Despite their different shaped load-deflection curves, the flexural load carrying capacity of PP and PVA FRCCs was approximately same with the prismatic specimens (thickness/span = 0.31). According to center-point and two-point loading flexural test results, two-point loading condition seems more appropriate to visualize multiple cracking for PVA fiber reinforced thin members.
Keywords:
fiber, flexural strength, multiple cracking, toughnessPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

