HYDRAULICS OF DOUBLE STILLING BASIN SYSTEMS
Abstract
Practical application of broken-axis stilling basin systems can provide significant financial benefits. At this moment there is no generally accepted calculation method for their design. Based on physical model investigations an approximate theoretical model has been developed. This model makes it possible to describe the hydraulic phenomena proceeding in the double, broken-axis stilling basin systems. Main elements of the theoretical model: - 1st part of the upper basin, dimensioned on the basis of throwing distance of free jet. - 2nd part of the upper basin, calculated by impulse-momentum theorem. - 3rd part of the upper basin, the lateral weir, for whose calculation a new method has been developed. During the physical model investigation of the lateral weir it has been proved that for a suitable velocity distribution in the lower basin a relatively homogeneous discharge distribution is required along the lateral weir. This can be attained by a linearly changing height of the weir. No research is required in the lower basin if the influx from the weir has a uniform distribution. The practical applicability of the complex theoretical description adjusted to the different phenomena was checked by the results on the double stilling basin with axis broken by 90°. This comparison has proved the practical applicability of the theoretical formulas.
Keywords:
hydraulic engineering structure, energy dissipation, stilling basin, spillway, system, physical model investigation, theoretical model, broken-axis stilling basin, systemsHow to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

