INVESTIGATION OF THE INTERNAL FORCES OF THE FIRST TRACK CONSTRUCTED WITH Y-SHAPE STEEL SLEEPERS UNDER OPERATION IN HUNGARY SUMMARY OF RESULTS OF RESEARCH
Abstract
The Hungarian State Railways (MÁV Rt.) plans to reconstruct the tracks with short rails and rail joints in its trunk line network by continuously welded rails, that is possible by applying, among other technical solutions, the Y-shape steel sleepers. The first track with Y-shape steel sleepers was constructed in Hungary in November 2003, in the Szabadbattyán - Tapolca railway line at the stop of Badacsony. As a consequence of the application of the Y-shape steel sleepers, a continuously welded rail track has been constructed in a curve with a radius of R=300 m, where previously there had to be rail gaps and rail joints with the concrete sleepers. On behalf of the Hungarian State Railways (MÁV Rt.), the Budapest University of Technology and Economics, Department of Highway and Railway Engineering carried out research series on the track with Y-shape steel sleepers under operation. The series of track measurements had the following aims: 1. to assess the technical parameters of the track with Y-shape steel sleepers, 2. to compare the technical parameters of the Y-shape steel sleepered track with those of a track with concrete sleepers, 3. to determine how these parameters change with time. The track measurements included three series: 1. determining the displacements of the sleepers and the rails under dynamic load of a locomotive, 2. measuring the lateral displacement of the track in a curve, perpendicular to its centre line due to the change of temperature between the variation summer and winter, 3. assessing the graph of the track examination coach. In this paper, the first two subjects will be discussed. The third theme of the research will be investigated in another paper. In Chapter 2, the Y-shape steel sleepers and the tracks constructed with them are described technically in general. The first track section constructed with Y-shape steel sleepers in Hungary is introduced in Chapter 3. Chapter 4 discusses the measurements and their results carried out on the track with Y-shape steel sleepers in Hungary. An evaluation of the results and of the track is given in Chapter 5.
Keywords:
Y-shape steel sleeper, continuously welded rail track, ballasted, track, railway trackHow to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

