Investigation on load bearing capacity of glass panes
Abstract
An experimental study was carried out on BME Department of Construction Materials and Engineering Geology to analyse the bending strength of glass pane. The influence of edge strength of single ply and laminated glass specimens were also investigated. Non heat treated and tempered single ply glass specimens of different thicknesses 6 mm, 12 mm and 19 mm and laminated (2×6 mm, 3×6 mm) glass specimens with constant span of 1.0 m and width of 0.36 m were tested in a four-point bending according to EN 1288-3:2000 \cite 1. The effect of interlayer material (resin and EVA foil) and the effect of temperature (-20\r C, +23\r C, +60\r C) on the structural behaviour of glass products were also studied. Strains were measured with strain gages in two regions of the surface of the glass pane (Region1 and Region2), see Fig. \G@refundefinedtrue \text ??\GenericWarning LaTeX Warning: Reference `fig1´ on page \thepage undefined. Surface stresses in two regions and bending strength of glass specimens were determined.
Keywords:
glass, tempered glass, surface stress, strain, bending strength, interlayer, temperatureHow to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

