Long-term analysis of bending moment resistance on pre-cast concrete beams
Abstract
Durability design of structures is an important part of the design process. A possible method for the durability design is the probabilistic approach considering changes of structural resistance and the load effect during a certain time period. In order to determine stochastic parameters of structural resistance as a function of time, deterioration of materials and the decrease of structural sizes due to environmental effects must be predicted. This paper is mainly focusing on the analysis of the bending moment resistance of pre-cast concrete beams as a function of time. The effect of creep, shrinkage, relaxation, carbonation induced corrosion and deterioration of cross-sectional sizes on the mean value and standard deviation of bending moment resistance were considered. The performed calculation method is illustrated by numerical example on a pre-cast, prestressed concrete beam. In case of the presented beam, the mean value of bending moment resistance decreases 4-6% and its standard deviation increases 200- 350% after 100 years depending on the relative ambient humidity. Results concerning mean value and standard deviation of structural resistance can be used for the purposes of probabilistic durability design. Considering the same safety level as in Eurocode 2, the introduced probabilistic design method delivers about 10% higher load carrying capacity as the application of relevant Eurocode 2 standard in case of the presented beam.
Keywords:
Durability, safety, rheological effects, bending moment resistance, pre-cast concrete, prestressed concreteHow to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

