Predictive model for drinking water treatment technology design - the efficiency of arsenic removal by in-situ formed ferric-hydroxide
Abstract
Coagulation by ferric-salt is a widely used technique for arsenic removal. Jar tests with synthetic water were conducted in order to investigate the combined effect of the raw water characteristics on the removal efficiency of in-situ formed ferric-hydroxide. Multiple linear regression analysis was carried to establish a robust model, which is able to estimate the residual arsenic concentration provided that the raw water contained 50-60 μg/L initial arsenic concentration. The estimation was based on the following variables: PO4-P concentration, final pH, SiO2 concentration and Fe3+ dose. The major factors influencing efficacy were the silicate concentration and applied coagulant dosage. The model was verified by data from 24 additional experiments, and the predicted and measured residual arsenic concentrations showed good agreement (R2 = 0.87).
Keywords:
Arsenic removal, Coagulation, Drinking water, Jar-test, Linear regression analysis, SilicateHow to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

