Numerical Investigation of RC Beams with an Integrated Frictional and Elastomeric Seismic Device
Abstract
In conventional seismic design, reinforced concrete (RC) frames are typically detailed to form plastic hinges that dissipate seismic energy through inelastic deformation, but this strategy also leads to significant local damage under severe loading. Recent research has focused on low-damage strategies that shift inelastic demand from primary RC members to dissipative components. In this study, a frictional and elastomeric seismic device, originally developed for steel structures, was numerically integrated into an RC beam. Initially, the 3D nonlinear finite element modeling approach was calibrated against the load-deflection response of an experimentally tested RC beam from the literature. Subsequently, the calibrated modeling approach was used to evaluate the cyclic response of device-integrated RC beams. A parametric study was performed to investigate the influence of the friction coefficient, bolt pretension, and embedment configuration of longitudinal steel plates. Numerical results indicate that the device can substantially increase the cumulative energy dissipation capacity of the RC beam. When a single, short embedded longitudinal plate is used to transfer high resisting moments, severe strain localization is observed, leading to premature damage in the surrounding concrete. Using multiple embedded longitudinal plates distributes plastic deformations across a larger concrete volume, preventing the formation of a single dominant strain localization band and allowing the friction mechanism to maintain stable hysteretic behavior at larger drift levels. Although these findings are based on numerical analyses and require experimental verification, they support the concept as a promising solution for low-damage RC applications, provided that embedment detailing is carefully designed.
Keywords:
reinforced concrete, frictional device, elastomeric device, low-damage seismic design, nonlinear finite element analysis, hysteretic behaviorPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

