Influence of Acidic and Alkaline Environments on the Mechanical Properties of Cement Mortars
Abstract
Cement-based materials are exposed to various internal and environmental aggressions of acidic and alkaline nature that may affect their durability. This study investigates the influence of aggressive environments on the mechanical and physical behavior of cement mortars. Mortar specimens (4 × 4 × 16 cm3) were prepared with a water-to-cement (w/c) ratio of 0.5 and cured in water at pH 7 for 28 days. Additional specimens were exposed to sulfuric acid solutions at pH 2, 3.5, and 5, as well as alkaline solutions at pH 11 and 12.5. The findings indicate that mortars deteriorate significantly when exposed to acid. Mass losses can reach 20%, compressive strength losses range from 31% to 47%, and tensile strength losses range from 16% to 34%, depending on the acidity. In contrast, alkaline exposure results in a little expansion, which can raise mass and volume by as much as 2.3%. Both the tensile and compressive strength losses remain below 11% and 16%, respectively. In order to clarify degradation mechanisms and guide the development of more resilient cement-based materials, this study compares the behavior of mortar in extremely acidic and alkaline environments.
Keywords:
cement, mortar, concrete, aggressive environment, pH, sulfuric acid solution, resistancePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

