Determining the Actual Shape of a Bridge Pylon with Cylindrical and Conical Shapes Using Point Cloud Data and the RANSAC Shape Fitting Method
Abstract
Determining the shape and deformations of structures with complex geometries has become an increasingly common task in the construction industry. This article presents a case study on determining the shape and deformation of a slope and circular steel structure, a cigar-shaped cable-stayed bridge pylon with varying cylindrical and conical shapes during three key construction stages using terrestrial laser scanning (TLS) point cloud data and the Random Sample Consensus (RANSAC) algorithm for shape fitting. A methodology involving vertical reorientation, point cloud slicing, and RANSAC-based circle fitting was applied to cross-sections of the pylon. Optimal RANSAC parameters were determined to be 80 iterations and a 5 mm tolerance, achieving reliable circle fitting with root mean square (RMS) errors predominantly within 3 mm across all scans. After initial steel frame installation, geometric distortion analysis revealed minimal deviations within a 2 mm radius error, a slight increase after concrete pouring, and a partial recovery in the final stage, except for a localized anomaly at the pylon's top. Deformation analysis along the pylon's axis showed maximum horizontal displacements of 65 mm according to the static models in the first scan, reaching a maximum of 269 mm after pouring concrete, with a subsequent reduction and change in direction after cable tensioning. This research demonstrates the efficacy of TLS and RANSAC for evaluating structural deformation and emphasizes the importance of parameter optimization for accurate point cloud analysis in complex civil engineering structures.
Keywords:
complex structure, geometric distortion, pylon, RANSAC parameters, TLSPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

