Experimental Investigation of Lateral Stability of a Longitudinally Assembled Girder Made of Precast Reinforced and Prestressed Concrete Parts
Abstract
This research focuses on the lateral stability (LS) of a longitudinally assembled girder (AG), constructed for both economic and constructional purposes. The AG features a central precast prestressed concrete (PPC) beam, 34.175 meters long, extended by two precast reinforced concrete (PRC) beams, each 2.63 meters long, connected by bolted joints. A gap between the joints was filled with high-strength grout to efficiently transfer compressive stresses. The experimental study considered two types of imperfections: initial lateral imperfections in the AG and the initial tilt angle between the connected surfaces. Three tests (AG1-A, AG1-B, AG2) were performed using nondestructive loading with concrete blocks to assess LS. The first two tests were conducted on AG1, keeping the initial imperfections consistent but varying the preload on the bolts, while the third test used specimen AG2, which had greater lateral imperfection at the mid-span cross-section. Test results showed that, due to the high preload, the tilt angle imperfection had a negligible impact on the AG's lateral stability, as separation at the connections was minimal. AG1, in tests AG1-A and AG1-B, remained laterally stable throughout the entire loading process, whereas AG2 experienced stability loss due to insufficient lateral restraints, significant geometric imperfections, and eccentric loading.
Keywords:
lateral stability, initial imperfection, initial sweep, assembled girders, bolted connectionPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

