Determination of Plastic Limit by Fall Cone Test for Soils with Different Grain Size Distribution
Abstract
Compaction parameters and consistency limits are fundamental engineering properties considered in the design of geotechnical applications. It is important to compare these parameters derived from experimental studies with the equations proposed in the literature or alternative methods. This study determined the plastic limit values of soils with different grain size distributions and different consistency limits using the relationship between penetration depth and water content from the fall cone test, employing a cone with 30° and 80 g characteristics. The method for determining the plastic limits has been developed based on a wide range of data. It defines the water content corresponding to a 3 mm penetration of the cone into the soil as the plastic limit. The plastic limit values determined by the proposed method were tested with a comprehensive dataset compiled from literature studies. The results indicated a satisfactory correlation between the plastic limits determined by the tread rolling method and those determined by the proposed method (R2 = 0.76). Furthermore, the compaction parameters obtained from the standard compaction tests were investigated using univariate and multivariate regression analyses, with consideration given to the liquid and plastic limits determined from the fall cone tests. The findings indicate that the compaction parameters can be predicted with high coefficients of determination (R2 = 0.89) using the plastic and liquid limits determined from the relationship between water content and penetration depth in the fall cone tests.
Keywords:
modified plastic limit, fall cone test, penetration depth, water content, compaction parametersPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

