Stability Analysis of Slopes under Surcharge Loading Using FE Stress Deviator Increasing Method-proposal of Stability Charts
Abstract
Given the well-known shortcomings of the traditional limit equilibrium methods (LEMs) in addressing slope stability issues, there has been a growing interest towards employing finite element analysis as a viable alternative in recent years. However, due to the inherent limitations in the conventional finite element analysis, the application of finite element method (FEM) as a strength reduction method (SRM) or as finite element limit analysis (FELA) does not consistently yield successful results. To improve the efficiency of finite element analysis for addressing slope stability problems, a new methodology called 'Stress Deviator Increasing Method' (SDIM) has been recently proposed. It involves gradual expansion of the mobilized stress Mohr's circles until the soil failure takes place according to a predefined non-convergence criterion. In this paper an attempt is made to analyze the effects of surcharge loading on both factor of safety (FOS) value and location of the slip line using the finite element by SDIM by carrying out a restricted parametric study. Specifically, the effects of surcharge loading magnitude, the proximity of the surcharge with respect to the slope edge and the load distribution span were thoroughly analyzed and documented in the light of FOS values and plastic strain regions. The paper ends by proposing design stability charts in which, for a given surcharge magnitude and a geometric configuration, the user is able to determine the FOS for a combination of soil strength parameters.
Keywords:
slope stability analysis, finite element analysis, limit equilibrium methods, stress deviator, surcharge loading, factor of safetyPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

