Influence of Key Shear Factors on the Shear Performance of Ultra-high Performance Fibre Reinforced Concrete Beam Containing Coarse Aggregate
Abstract
This paper assesses the effect of direct and indirect factors on the shear performance of ultra-high performance fibre reinforced concrete beam containing coarse aggregate (UHPFRC-CA) using four point loading arrangement. The obtained results were used to categorize UHPFRC-CA beam's failure mode, establish the influence of key factors on shear performance, and develop UHPFRC-CA beam's compression zone resistance and first shear cracking load equations whose results were compared with those from this research, other researchers and existing equation. Findings revealed that UHPFRC-CA beam fails in cable stayed, shear partial compression, cable stayed-diagonal tension and cable stayed-partial shear tension. Shear span-depth ratio (a/d) has the most influence on the beams' failure mode. Higher percentage volume of steel fibre improves ultimate load capacity and midspan displacement resistance at failure load. Hooked-end steel fibre improves deformation (crack width and midspan displacement at failure load) resistance. Higher a/d is more beneficial to midspan displacement resistance at failure load than load capacity; while lower stirrup spacing leads to higher midspan displacement at failure load. Finally, the developed first shear cracking load equation can adequately capture the true first shear cracking load of UHPFRC-CA beam; and the developed compression zone resistance equation can be conveniently used to represent the joint contribution of compressive strength and fibre factor to UHPFRC-CA beam's shear resistance.
Keywords:
beam, coarse aggregate, compression zone resistance, shear cracking equation, shear factors, ultra-high performance fibre reinforced concretePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

