Influence of Steam Curing on the Performance of High-strength Concrete Incorporating Metakaolin
Abstract
This study aims to investigate the influence of steam curing on the performance of high-strength concrete incorporating metakaolin. An experimental study was conducted to investigate the compressive strength, chloride permeability, initial surface absorption, and water absorption, as well as thermal degradation under various steam curing scenarios. Four concrete mixtures were prepared in this study, each with different percentages of metakaolin, as partial substitution of cement weight of 0%, 5%, 10%, and 15%. The water–binder ratio was set to 0.32 in all mixtures. The specimens underwent steam curing for 0, 4, 8, and 16 hours at a temperature of 55 °C. Results indicate that the specimens that have been steam cured and contained metakaolin exhibit improved compressive strength during the initial stages of their strength development. Steam curing has been demonstrated to enhance the concrete’s resistance to chloride penetration and reduce initial surface absorption while increasing water absorption. The optimal replacement of cement with metakaolin to enhance strength and transport properties in high-strength concrete under steam curing regimes is between 10% and 15%. Future research could examine the effects of long-term steam curing on the durability and performance of concrete incorporating an optimal proportion of metakaolin.
Keywords:
metakaolin, high-strength concrete, steam curing, industrial waste chloride resistance, differential thermal analysisPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

