Meso-scale Study of Bond Behavior between Ribbed Steel Rebar and Fiber-reinforced Cementitious Composite Considering Rebar Rib Geometry
Abstract
This study aims to develop a meso-scale finite element approach to investigate the pull-out behavior of ribbed steel rebar and fiber-reinforced cement composites. We considered separately the three phases of steel fibers, cement composite matrix, and rebar within the meso-scale finite element model. A random distribution of fibers was generated in the matrix based on the geometric characteristics of the fibers and their volume fraction. By employing the interfacial transition zone (ITZ) model, the interaction between rebar and fibers with cement composite was simulated. Experimental pull-out tests were conducted to determine the parameters of the model. A meso-scale finite element model was validated and the effect of rebar diameter and fiber volume fraction on the bond behavior of rebar with fiber-reinforced cement composites was examined. In accordance with the experimental results, the bond-slip curve obtained with the meso-scale finite element model can be divided into five areas: non-slip, slight slip, splitting, decreasing, and residual. Additionally, it can be observed that fiber-free cement composites fail by splitting, whereas specimens containing fibers fail by sliding. This numerical model is therefore able to predict and estimate the influence of a variety of parameters on the pull-out response between fiber-reinforced cement composite and ribbed bar and failure mechanisms without the need for expensive and time-consuming testing.
Keywords:
fiber-reinforced cement composite, ribbed rebar, pull-out test, meso-scale finite element modelPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

