Formation Mechanism of Rail Corrugation for Modern Tram Lines
Abstract
In order to explain the phenomenon of corrugation on measured line sections of the modern tram, a numerical model of modern tram-track coupling has been established by utilizing the multi-body dynamics method, and the formation mechanism of corrugation has been studied from the perspective of wheel-rail contact creep. The results show that the smaller the curve radius is, the greater the probability of corrugation occurs. The corrugation wavelength range is 40 mm~50 mm, the wave depth range is 0.05 mm~0.1 mm, and the wave depth is relatively small compared with the corrugation wave depth of metro lines, which is in line with the characteristics of the light-load operation of the tram. The formation mechanism of corrugation on modern tram sharp curves can be described as wheel-rail contact creep saturation leads to the generation of corrugation, and the source of creep is related to the guiding mechanism of the longitudinally coupled independent wheelset bogie. The formation of corrugation on the straight line of the modern tram is related to the difference in wheel diameters between the front and rear wheelsets on the same side, which can lead to different longitudinal velocities, thus generating longitudinal creep forces and inducing rail corrugation.
Keywords:
modern tram, rail corrugation, multi-body dynamics, contact creep, wheel diameter differencePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

