Failure Mechanism and Structural Safety Assessment of the Primary Support Structure of Soft Rock Tunnel: A Case Study
Abstract
Based on a soft rock tunnel in a mountainous area of northwest Yunnan Province, a refined numerical model of different support forms considering structural interaction is established to comprehensively evaluate the structural failure mechanisms and mechanical responses of different support forms. Research shows that compared to steel rib structures, the axial force and bending moment of sprayed concrete structures is larger under different combinations of support structures. Compared with a single-layer support structure, the stress distribution at each position of the double-layer I-shaped steel structure is more uniform, and the sprayed concrete structure only experiences compression damage at the corner of the side wall. As the strength of sprayed concrete increases, the stress distribution of sprayed concrete at the arch waist becomes more uniform. The stress concentration state of sprayed concrete at the corner of the tunnel wall and the plastic yield state of the steel rib structure have also been improved. The higher the concrete strength, the lower the stress ratio on the steel rib’s inner and outer sides.
Keywords:
tunnel engineering, support structure, structural optimization, mechanical properties, safety assessmentPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

