Study on Coordinated Deformation Failure Mechanism and Strength Prediction Model of Rock-lining Concrete
Abstract
Shotcrete has been widely used in the excavation of caverns and tunnels as a key load-bearing element in the support system. However, the interfacial stresses and bond strengths within the composite structures formed by the interaction of geologic bodies and tectonic formations are not well understood, which can lead to safety accidents and excessive wastage of support materials in engineering. To address this gap, rock-concrete composite specimens were created using six distinct types of surrounding rocks. The strength law of composite specimens was analyzed, and the uniaxial compressive strength prediction model of composite specimens was derived based on Mohr−Coulomb strength yield criterion. The results show that the uniaxial compressive strength of the composite specimen changes with the change of rock type, which is between the strength of rock and concrete. The uniaxial peak strength and elastic modulus of composite specimens are linearly positively correlated with the ratio (Y) of concrete-rock elastic modulus, which is easily affected by concrete properties. However, the peak strain is linearly and negatively correlated with Y, which is greatly influenced by rock. The rock-concrete interface of the composite specimen plays an important role in the failure of the specimen, which changes the stress transfer state of the composite specimen, produces uncoordinated deformation, and finally causes the failure of the specimen. The theoretical and test value error of the derived composite specimen uniaxial compressive strength prediction model are –1.19%~12.20%, and the theoretical calculation model can be used to predict the uniaxial compressive strength of rock-concrete composite specimens.
Keywords:
rock-concrete, composite interface, uniaxial compression, mechanism of destruction, strength predictionPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

