Influence of Thermoplastic Polyurethane on the Properties of Asphalt Cement and the Elastic Behavior of Asphalt Mixtures
Abstract
The useful life of pavements determines the design of asphalt mixtures. However, premature structural failures and low durability are one of the main problems in pavement engineering today. The action of loads produced by traffic, exposure to environmental factors and the inadequacy of conventional designs of asphalt pavements are some of the main problems associated with the durability of the pavement. The modification of asphalt binders is an alternative that has been used for some years to improve the properties of bituminous material. Among the modifying materials are elastomers, a class of polymers with elastic properties that can be heat-treated. In this study, the asphalt was modified by wet means by adding 5, 10 and 15% of Thermoplastic Polyurethane (TPU) by weight of the binder. Subsequently, standard samples were prepared with the characterized constituents and mixtures with the modified asphalt cement. Consequently, tests were carried out to obtain the optimal mixture that improves the properties of conventional pavement. The results show that the optimal TPU addition content is 5%. With this percentage, the modified binder presented a greater elastic recovery of up to 5.60% and a reduction of up to 42.6% in penetration compared to conventional asphalt. In addition, using the Marshall method, it was determined that the stability of the modified mixtures was much higher than that of standard mixtures for light, medium and heavy traffic; so, they will have a higher resistance to deformation and better fatigue behavior.
Keywords:
modified asphalt, TPU, modified asphalt mix, wet process, Marshall DesignPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

