Effect of Wrapping Thickness and Type on Reinforced Bridge Piers: A Numerical Study
Abstract
This research paper investigates the impact of wrapping thickness and type on reinforced bridge piers through a numerical study. The Incesu bridge, located in the Ardanuç district of Artvin province, was selected as the case study, as it was completed with low concrete strength. Initially, the bridge was examined, revealing that the piers were inadequate against dynamic, dead, pedestrian, and covering loads. The study concentrated on employing carbon fiber reinforced polymer to reinforce the bridge piers. Various models were wrapped with carbon fiber reinforced polymer in full-length, half-length, and one-meter intervals. In the analysis, it is assumed that the wraps are linked to each other in both principal directions and not detached from one another. Along with the analyses conducted, stress and strain values are presented separately. It was observed that the wrapping effect obtained in small-sized elements in literature could not be obtained in large-sized elements. As the concrete quality improves, the influence of wrapping thickness diminishes. Moreover, the effects of full-length and half-length wrapping are very close to each other, suggesting that half-length wrapping of bridge piers is sufficient. The authors believe that the obtained analysis results will prove beneficial in achieving economic advantages in retrofitting projects within the construction sector.
Keywords:
carbon fiber reinforced polymer, numerical modelling, polymer thickness, ANSYSPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

