Empirical Punching Shear Capacity Equation for Reinforced Concrete Two-way Slabs with Openings
Abstract
This study proposes a new equation to estimate the punching shear capacity of Two Way Reinforced Concrete Flat Slab Column (TRFSC) connections with openings. The TRFSC connections with openings in the literature were simulated using the finite element modeling technique. Then, the test results were used to calibrate and verify the finite element model. Next, the number of test data was artificially increased using the finite element model to cover a wide range of critical perimeters. Finally, the effects of several parameters such as the size of the openings in the reinforced concrete slabs, their position, and distance concerning the column on which the punching loading is applied on the variation of punching shear load capacity of TRFSC connections with openings were observed, the results showed that the proposed equation generally gave better results than the several current code equations. For the study used in the verification of the finite element model, it was observed that the ratios of the punching capacity values calculated using the experimental results and the regulations varied between 0.79 and 0.92 on average, and the regulations gave results that were not on the safe side for TRFSC connections with openings. However, with the nonlinear correction coefficient proposed in this study, the ratios of the experimental results and analytically calculated capacity values were calculated as 1.10 on average, and the standard deviation and variant values decreased much more.
Keywords:
two-way RC slab, punching, opening, finite element analysis, ANSYSPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

