Influence of Sustainable Grout Material on the Moisture Damage of Semi-flexible Pavement
Abstract
Semi-flexible pavement (SFP), also known as grouted pavement, is a type of pavement structure consisting of a porous asphalt skeleton with air voids between 25 and 35% injected with cementitious grout materials. The special skeleton of SFP provided enhanced durability and resilience, making it a promising option for the construction of road surfaces in high-traffic areas and severe conditions. The main aim of the current research is to investigate the rutting behavior and moisture resilience of SFP-containing sustainable grout using ceramic waste powder (CWP). This research introduced the use of CWP as a replacement for conventional grout (cement) in SFP for the first time. CWP partially replaced cement at ratios of 15, 20, 30, 40, and 50% of the cement weight. Indirect Tensile Strength (ITS) and Hamburg Wheel Tracking Tests (HWTT) were used to evaluate the performance of SFP to reduce the detrimental effect of moisture. The grout modified with CWP shows excellent results in the ITS and Tensile Strength Ratio (TSR), and all modified SFP mixtures give higher values in these tests compared with Control Mix (CM). In the HWTT, the minimum rut depth of the modified SFP was 2.8 mm and 3.10 mm. Compared to CM, rutting decreased by 73%–76% for CWP mixes with 20% and 30% replacement. This indicates the high fluidity of CWP, which enabled it to penetrate all voids in the porous pavement (PA) and form a dense microstructure due to its excellent pozzolanic interaction, making it a strong structure capable of bearing rutting.
Keywords:
semi-flexible pavement, ceramic waste powder, polymer-modified bitumen, sustainable grout, SEM/EDXPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

