Study on a 3D Train-Track-Bridge System Dynamic Behavior Subjected to Over-Height Collision Force
Abstract
Railway bridges are built to allow trains to cross over highways, valleys, or other transportation infrastructure. In recent years, the number of railway bridges subjected to over-height collision forces has increased. These collisions damage the bridge and affect the safety of the running train. In this investigation, first, a 3D GT26 train-track-bridge interaction model was created to study the effects of collision forces applied to the bridge superstructure and not to the bridge piers as a novelty of this research using the finite element analysis. Then, the dynamic responses of the railway bridge due to the GT26 train load and subjected to over-height collision forces were obtained. Finally, the different sensitivity analyses describe that changing the length of the collision area, the bridge span, and the value of collision forces affect the dynamic responses of the bridge in the contact area. The results show that maximum lateral displacement of the concrete girder in case of assuming the GT26 train 3D model plus over-height collision force is 8.88% less than the case in which considering only freight train axle-load and same over-height collision force apply to the bridge superstructure, and its value reduces from 45 mm to 41 mm. The maximum lateral displacement of the bridge deck is reduced by about 71% by increasing the collision area length from 0.2 m to 1.2 m and at the impact area rises about 43.5% by changing collision speed from 48 km/hr to 144 km/hr as collision force from 7753 kN to 13370 kN.
Keywords:
railway bridge, over-height collision force, train-track-bridge interaction model, finite element analysisPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

