The Influence of Brittleness of Interlayers on the Failure Behavior of Bedding Rock; Experimental Test and Particle Flow Code Simulation
Abstract
In the present study, the effects of angle and brittleness of interlayers on the shear failure behavior of notched bedding rock have been scrutinized using experimental shear tests and particle flow code (PFC) simulation. Notched bedding models with dimensions of 20 cm × 24 cm × 5 cm containing soft interlayer and hard interlayer were prepared. The ratio of compressive strength to tensile strength in soft gypsum and hard gypsum are 12 and 7.8, respectively. The layer angel changed from 0° to 90° with an increment of 15°. The lengths of notches in each model are similar and were equal to 20 mm, 40 mm, and 60 mm. Models were tested by Punch shear by displacement loading rates of 0.05 mm/min. Results showed that pure tensile fracture was developed from the tip of the notch, and propagated in the direction of the shear loading axis till coalescence with the model boundary. Whereas soft brittle gypsum has less deformability in comparison to hard ductile gypsum therefore the continuity of shear displacement associated with crack growth in soft interlayer was less than that in hard interlayer. Also, soft brittle gypsum has less shear strength in comparison to hard ductile gypsum therefore the shear strength of bedding rock has maximum value when hard ductile gypsum was occupied more percentage of shear surfaces. The failure mechanism was alike in both the numerical simulation and the experimental test.
Keywords:
bedding rock, soft interlayer, hard interlayer, PFC2DPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

