Experimental and Numerical Assessment of the Seismic Behavior of Non-uniform Slit Dampers and Bar Dampers in Moment Resisting Reinforced Concrete Frames
Abstract
The use of lateral bearing systems to rehabilitate reinforced concrete frames has been one of the most important research topics in structural engineering. Non-uniform Slit Dampers (NSD), as well as Bar dampers, are two types of novel yielding dampers whose effects on reinforced concrete structures have been evaluated in this research. In this research, three experimental samples with a one-third scale were constructed to assess the effect of the presence of NSD and Bar damper in reinforced concrete frames. Also, 16 numerical models were created to evaluate the number of used dampers in experimental specimens in order to determine the optimal mode of using these dampers. Seismic parameters of stiffness, ultimate strength, ductility, and energy dissipation capacity were investigated in this research. The research results showed that the use of lateral bearing systems with NSD and bar dampers can have a significant impact on the seismic performance of reinforced concrete moment resisting frames. Also, in the numerical models that were made using ABAQUS software, it was concluded that the use of a smaller number of dampers compared to the experimental models can still improve the seismic parameters of the system while the cyclic capacity of the system does not drop.
Keywords:
RC frames, Non-uniform Slit Damper (NSD), bar damper, yielding damper, experimental assessmentPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

