Discussion on Blasting Vibration Velocity of Deep Rock Mass Considering Thickness of Overlying Soil Layer
Abstract
The thickness of the overlying soil layer has a certain influence on the blasting vibration response of deep rock mass. The vibration wave velocity of the overlying soil layer during the construction of deep blasting is measured in this paper. Based on the measured data, parameters k and α of the Sadowski equation are used to characterize the influence of the comprehensive geological conditions of the site on the vibration wave propagation. The model of blasting vibration velocity of deep rock mass is established according to the existing blasting theory, and the calculation accuracy of the model is verified according to the field blasting parameters. The new model is used to simulate different overlying soil thicknesses, and the safe allowable distance under different soil thicknesses is calculated. The calculated results show that with the increase of the thickness of the overlying soil layer, the blasting vibration velocity decreases and the attenuation velocity decreases gradually. The research results reveal the reduction effect of overlying soil thickness on blasting vibration to some extent. In the area with overlying soil layer, the safe allowable distance of blasting vibration safety can be appropriately reduced to increase the land utilization rate, which has important reference value for the blasting design and safety prediction of deep rock mass.
Keywords:
deep rock blasting, vibration velocity, overlying soil layer, safe allowable distancePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

