Incorporation of High Loss-on-ignition Fly Ash in Producing High-strength Flowable Mortar
Abstract
A large amount of fly ash with a high loss on ignition (over the maximum allowance value stipulated by ASTM C618) is being released and increasing daily in Vietnam. The recycling of this fly ash is still limited, while a big remaining part is disposed of in storage yards, causing environmental pollution. On the other hand, the demand for high-strength mortar as a repair material is increasing for high-rise buildings and important projects, gradually depleting natural resources. However, the application of this fly ash in the production of mortar is restricted in the literature. In this study, local fly ash with a high loss on ignition is used to replace 0%, 15%, 30%, 45%, and 60% cement content in producing high-flowability and high-strength mortar. Changes in the fresh and hardened mortar properties were systematically investigated using samples produced with various fly ash contents. Test results indicate that the effect of impurities in fly ash on the mortar’s workability can be neglected due to the spherical shape of fly ash. The unit weight, thermal conductivity, and drying shrinkage of mortars decreased with increasing fly ash content. Although some other properties of mortar are reduced due to the use of high loss-on-ignition fly ash, all mortars produced in this study still showed good quality with the presence of silica fume. In addition, the relationships between compressive strength and flexural strength with ultrasonic pulse velocity were established to predict the strength of mortar in a non-destructive method.
Keywords:
high-flowability mortar, high-strength mortar, raw fly ash, high loss on ignition, silica fumePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

