Experimental and Numerical Behavior of Basalt Fiber Reinforced Short Concrete Columns Under Axial Loading
Abstract
This paper presents experimental and numerical investigations to reveal effecting of incorporating basalt fibers into a concrete matrix on the structural behavior and loading capacity of axially loaded short columns. Six volume fractions of chopped basalt fibers are added to the same concrete mixture to prepare six identically reinforced columns. The results illustrate that the bonding forces between microfilaments and matrix increase to provide good internal confinement for concrete ingredients, which enhances compressive strength and column loading capacity. The 0.3 % basalt fiber awarded the best compressive strength, while 0.15 % and 0.3 % awarded the best load capacity to the column. The Addition of basalt fibers delays cracking to increase the cracking load by about 50 % more than no fiber column, which indicates that it needs more energy to overcome the bonding strength between filaments and matrix. At the ultimate state, the loading capacity increases by 15 % and 17 % for 0.15 % and 0.3 % of basalt fibers and by 10 % and 12 % for 0.45% and 0.6% of basalt fiber. The 0.75 % decreased compressive strength by about 6 % but raised the column's ultimate load by 18 %. Therefore, basalt fiber benefits the cracking load more than the maximum load. The finite element showed approaching the peak load in numerical and experimental results. The longitudinal rebars and ties do not yield at the ultimate state. Increasing the reinforcement ratio raises loading capacity while lowering the yield stress of bars minimizes the maximum load.
Keywords:
Basalt fibers, short column, compressive strength, bearing capacityPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

