Cyclic Behavior of New Steel Plate Shear Walls Reinforced with Trapezoidal Corrugated Plates
Abstract
Unstiffened steel plate shear walls have low buckling strength, which caused development diagonal tension field under lateral load. Corrugated plates have higher out-of-plane stiffness and improved buckling stability. Combining corrugated and flat plates in steel shear wall web could be effective. In this paper a new steel shear wall system reinforced with trapezoidal corrugated steel plates were proposed. In this study, the behavior of the system was experimentally studied under cyclic loading. Four specimens with the one-third scale were evaluated, which were control unstiffened specimen, the specimen with vertical 45° trapezoidal corrugated web, specimen with a corrugated web plate reinforced with two flat plates, and specimen with a flat web plate reinforced with two corrugated plates. In all four specimens, the total thicknesses of steel plates were the same; therefore, the thickness of each plate in specimens with three plates was one-third of the specimen with one plate. The studied parameters were the bearing capacity, maximum base shear, stiffness, ductility, energy absorption, and modification factor for the dissipation capacity of the specimens. The results revealed the maximum lateral load capacity of specimen with a flat web plate reinforced with two corrugated plates increased about 17%, 37%, and 19%, comparly to unstiffened specimens, vertical 45° trapezoidal corrugated web, and corrugated web plate reinforced with two flat plates, respectively. According to the results, the behavior of the seismic parameters of the proposed specimen with a flat web plate reinforced with two corrugated plates was clearly better than that of the other specimens.
Keywords:
cyclic loading, experimental test, steel plate shear wall, trapezoidal-corrugated steel plate shear wallPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

